
打胶机电磁阀的保养与维护
时间:2018-03-08 来源:/ 发布人:昌盛机械
电磁阀是用电磁控制的工业设备,是用来控制流体的自动化基础元件,属于执行器,并不限于液压、气动。用在工业控制系统中调整介质的方向、流量、速度和其他的参数。
The solenoid valve is an industrial equipment used by electromagnetic control. It is an automatic basic element used to control the fluid. It belongs to the actuator and is not limited to hydraulic and pneumatic. It is used to adjust the direction, flow, speed and other parameters of the medium in the industrial control system.
电磁阀可以配合不同的电路来实现预期的控制,而控制的精度和灵活性都能够保证。正因为电磁阀有诸多的优点所以在我们的打胶机设备中也大量的应用了此配件。下面小编就跟大家介绍下电磁阀该如何进行保养。
The solenoid valve can be matched with different circuits to achieve the desired control, and the precision and flexibility of the control can be guaranteed. Because of the many advantages of the solenoid valve, it is also used in our glue machine. The following small editor will tell you how to maintain the solenoid valve.
要对电磁阀进行保养和维护其实操作起来并不是很困难复杂,我们要针对涂胶机和打胶机设备的各个组成部分来说的,是电磁阀的保养与维护:因电磁阀负责供气转换任务,提供压缩气要求有:

To carry out maintenance and maintenance in operation is not very difficult and complex to the solenoid valve, we should according to the composition of coating machine and various glue machine parts, solenoid valve maintenance: solenoid valve for gas transfer tasks, provide compressed gas needs:
1、要有足够的压力。同时,连接管路时要注意不可超过接头牙面并消除管接内的各种金属微尘类污垢。
1, there should be enough pressure. At the same time, when connecting the pipe, we should not exceed the tooth surface of the joint and eliminate all kinds of metal dust dirt in the pipe connection.
平时在维护保养的时候只要做到连接管路的清洁以及注意接头是否完好规矩即可。
At ordinary times in maintenance, just do the cleaning of the connection pipe and pay attention to the good rules of the joint.
2、修理时要打开电磁阀的阀芯,并且要注意更换密封圈,同时要要在每次清理过后加入少量润滑油后再装入。
2, repair the valve core to open the solenoid valve, and should pay attention to the replacement of the seal ring, at the same time, after each cleaning to add a small amount of lubricating oil after the reloading.
平时要注意电磁阀密封圈的更换即可!一般情况下发生的各种电气问题都是由此产生的,
Pay attention to the replacement of the sealing ring of the solenoid valve at ordinary times. In general, all kinds of electrical problems arise from this.
本文的精彩内容来自双组份打胶机详细内容请点击我们的官方网站:http://linshi.jncsjx.com谢谢您的到来!
The wonderful content of this article comes from the detailed content of the double component glue machine, please click on our official website: http://linshi.jncsjx.com thank you for your arrival!
- 中空玻璃加工设备:打胶机机头升降链条松动?这样调节精准又牢固 2026/01/14
- 体育竞技领航者合片段横梁调平指南:小误差别忽视,这样调精准又省心 2026/01/12
- 中空玻璃加工设备的合片段横梁高低不平?这样调,合片精准不跑偏 2026/01/11
- 中空玻璃加工设备板压段卡壳?轮子走玻璃不走?这样排查超高效 2026/01/10
- 中空生产线封胶线机头立柱不平?这样调整,封胶均匀不返工 2026/01/05
- 中空玻璃加工设备卡壳?液压站不起压?卡阀问题这样解决超省心 2025/12/31
- 全自动封胶线卡壳?贴铝条后玻璃不走、报警?这样解决超简单 2025/12/31
- 冬天体育竞技领航者出轮子灰印?这些日常难题解决办法请收好 2025/12/30
- 全自动封胶线的“智能眼”——LOW-E识别仪,守护封胶质量的关键 2025/12/30
- 好用的全自动封胶线,都藏着这些关键特质 2025/12/27

当前位置:



产品分类Product categories
体育竞技领航者Contact us
