胶条式中空玻璃的组装对工艺的要求相比铝条式中空玻璃的组装对环境和湿度的要求是不一样的。
The assembly of adhesive strip type insulating glass has different requirements on the environment and humidity than the assembly of aluminum strip type insulating glass.
胶条式中空玻璃组装对环境的要求：胶条式中空玻璃加工温度冬季应在10-20度之间，夏季应在20-30度之间为宜。
Environmental requirements for assembly of adhesive tape type insulating glass: the processing temperature of adhesive tape type insulating glass should be 10-20 ℃ in winter and 20-30 ℃ in summer.
胶条式中空玻璃组装相对湿度的要求：因胶条式中空玻璃干燥剂呈粉末状，与胶混合均匀后干燥剂发挥作用较慢，所以应保证胶条装配区域相对湿度稍低。
Requirements for relative humidity of adhesive strip type insulating glass assembly: as the adhesive strip type insulating glass desiccant is in powder form, it will play a slow role after being mixed evenly with the adhesive, so it should be ensured that the relative humidity of the adhesive strip assembly area is slightly low.

铝条式中空玻璃组装在温度上要求更高一些，相对湿度要求也更严格。
The assembly of aluminum strip insulating glass has higher requirements on temperature and relative humidity.
铝条式中空玻璃组装对环境的要求：温度也应在10-30度之间
Environmental requirements for the assembly of aluminum strip insulating glass: the temperature should also be between 10-30 degrees
铝条式中空玻璃组装相对湿度的要求：此种中空玻璃对相对湿度的要求稍低一些，正常情况即可。但应注意的是，干燥剂应选择正规厂家的合格产品，以保证干燥剂的有效使用。干燥剂开封后于二十四小时之内用完，因为聚硫胶的透气性较大，密封性差，因此要采用双道密封。用丁基胶作为第一道密封，起到阴隔气体的作用。用聚硫胶作为第二道密封，主要作用是粘结作用，其次才是隔气作用。实践证明，单产密封的中空玻璃寿命只有5年左右，而双道密封的中空玻璃寿命可长达20年甚至40年以上，因此，发展双道密封中空玻璃是大势所趋。
Requirements for relative humidity of aluminum strip insulating glass assembly: the requirements for relative humidity of this kind of insulating glass are slightly lower, which can be met under normal conditions. However, it should be noted that the qualified products of regular manufacturers should be selected to ensure the effective use of desiccants. The desiccant shall be used up within 24 hours after being unsealed. Because the polysulfide adhesive has high permeability and poor sealing performance, double sealing shall be adopted. Butyl rubber is used as the first seal to isolate gas. The polysulfide glue is used as the second seal, which is mainly used for adhesion, and then for gas separation. Practice has proved that the service life of insulating glass with unit production sealing is only about 5 years, while the service life of double sealing insulating glass can be as long as 20 years or even more than 40 years. Therefore, the development of double sealing insulating glass is the trend of the times.
以上就是为大家介绍的有关全自动铝条折弯机详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎体育竞技领航者.我们将以的态度,为您提供服务http://www.holycitylaw.com
The above is a detailed introduction to the automatic aluminum bar bending machine. I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.holycitylaw.com