中空玻璃打胶机分成三大类：立式全自动生产线、卧式半自动打胶机、手动打胶机。
There are three types of insulating glass gluing machines: vertical automatic production line, horizontal semi-automatic gluing machine and manual gluing machine.
立式全自动生产线：整体自动化程度较高，基本不需要人工操作。因其适合量产，所以更适合规模较大、工程量较多的企业。如果我们规模没有那么大，承接工程没有那么多，就需要多考虑考虑了。
Vertical automatic production line: the overall degree of automation is high, basically no manual operation. Because it is suitable for mass production, it is more suitable for enterprises with large scale and large quantities. If our scale is not so large and we do not undertake so many projects, we need to consider more.
手动打胶：全程需要人工操作，工作需要技术性。而且工作效率较低，工作难度大。所以除非能确保两位以上技术娴熟的打胶师傅，为你工作。否则不推荐。
Manual glue: the whole process needs manual operation, and the work needs technicality. And the work efficiency is low, the work is difficult. So unless we can make sure that more than two skilled gluing masters work for you. Otherwise, it is not recommended.
卧式半自动打胶机：整体来说，卧式半自动打胶机的综合评分是高的。它是介于立式全自动和手动打胶之间的一款。具备自动打胶功能，从这方面来说要远远超越手动打胶。还能满足中空玻璃生产的工程需求，虽然产量方面不能媲美全自动生产线，但是作为中小型企业的生产绝对够用。卧式半自动打胶机的占地面积要远远小于立式全自动生产线，也就10平方米左右。
Horizontal semi-automatic glue machine: Overall, the comprehensive score of horizontal semi-automatic glue machine is the highest. It is between a vertical automatic and manual glue. It has the function of automatic gluing, which is far beyond manual gluing. It can also meet the engineering needs of insulating glass production. Although the output is not comparable to the automatic production line, it is absolutely enough for small and medium-sized enterprises. The floor area of the horizontal semi-automatic gluing machine is far less than that of the vertical automatic production line, which is about 10 square meters.

更新内容：
Update content:
卧式中空玻璃打胶机设有驱动传动机构和控制机构，驱动传动机构是公知公用的、例如电机、皮带组成的驱动传动机构，电机、齿轮齿条组成的驱动传动机构等等；控制机构也是公知公用的，例如PLC(可编程序控制器)柜，电器控制柜等控制机构连接驱动传动机构，控制其工作状态，驱动传动机构连接胶枪，控制胶枪在直线滑道上的运动状态。
The horizontal insulating glass gluing machine is equipped with a drive transmission mechanism and a control mechanism. The drive transmission mechanism is known and common, such as a drive transmission mechanism composed of a motor and a belt, a drive transmission mechanism composed of a motor and a gear rack, etc; The control mechanism is also known and public. For example, PLC (programmable logic controller) cabinet, electrical control cabinet and other control mechanisms are connected with the driving transmission mechanism to control its working state. The driving transmission mechanism is connected with the glue gun to finally control the movement state of the glue gun on the linear slide.