中空玻璃胶机从功能上讲，非常简单。主要关注中空玻璃上胶，但中空玻璃上胶机在上胶过程中可能会遇到不完全上胶的问题。
Hollow glass glue machine is very simple in function. The main concern is the gluing of insulating glass, but the gluing machine may encounter the problem of incomplete gluing in the gluing process.
事实上，我们这个问题主要是由以下三个条件造成的!
In fact, our problem is mainly caused by the following three conditions!
1. 上胶速度太快
1. Glue application speed is too fast
一些客户为了加快生产计划在自己的生产节奏,调整密封剂认为太快,导致胶体的负责人还没有完全达到合格标准的塑料运行到下一个地方,如果我们需要加速调整橡胶机运动参数,所以我们也要有相应的设置相应的胶水供应系统,如这一次我们需要增加供应压力,增加胶速度,使上胶机随物体移动速度增加。如果我们只增加胶水机的速度而不调整压力，很可能是胶水不够用。
In order to speed up the production schedule and adjust the sealant, some customers think it is too fast. As a result, the person in charge of the gel hasn't completely reached the qualified standard for the plastics to run to the next place. If we need to speed up the adjustment of the movement parameters of the rubber machine, we also need to set up the corresponding glue supply system. For example, this time, we need to increase the supply pressure, Increase the glue speed, so that the glue machine with the object moving speed increases. If we only increase the speed of the glue machine without adjusting the pressure, it is likely that the glue is not enough.

2. 供胶压力不足
2. Insufficient glue supply pressure
事实上，这种情况已经在前一种情况下描述过了，即使不调整胶机的速度也会出现打胶不满意的情况，那么有可能供应的胶压力太小。此时我们只需要调整胶水压力就可以完美解决这个问题。
In fact, this situation has been described in the previous situation. Even if the speed of the glue machine is not adjusted, there will be unsatisfactory gluing, so it is possible to supply too little glue pressure. At this time, we just need to adjust the glue pressure to solve this problem perfectly.
3.避免损坏传感器
3. Avoid damaging the sensor
这种情况非常罕见，但不能排除。在我们的中空玻璃上胶机的头部，有一个传感器可以检测铝带的深度。如果铝带过深或过浅，会自动调节移动速度和上胶压力(自动调节范围小)。这可能会发生，如果我们的铝带本身是一个不同的色调，加上损坏我们的传感器!
This is very rare, but it cannot be ruled out. At the head of our insulating glass gluer, there is a sensor that can detect the depth of the aluminum strip. If the aluminum strip is too deep or too shallow, it will automatically adjust the movement speed and glue pressure (the automatic adjustment range is small). This can happen if our ribbon itself is a different tone, plus damage to our sensors!
以上就是双组份打胶机对如何避免上胶不全的措施的详细介绍，想要了解更多请点击官网http://www.holycitylaw.com
The above is a detailed introduction of the two-component dispenser on how to avoid incomplete gluing. To learn more, please click http://www.holycitylaw.com