1. 橡胶泵:A橡胶泵、B橡胶泵、比例泵采用我公司研制的高粘度液体往复高压柱塞泵，结构简单，性能稳定。高压阀口采用合金材料特殊处理，硬度可达HRC70o，有效避免粘着剂中硬质颗粒对阀口的损坏。该密封是由增强聚四氟乙烯，耐摩擦和腐蚀，适用于大多数化学溶剂。性能更稳定，使用寿命更长。控制阀采用静态表面磨削，保证泵内无压力泄漏。
　　1. Rubber pump: a rubber pump, B rubber pump and proportion pump adopt the high viscosity liquid reciprocating high-pressure plunger pump developed by our company, with simple structure and stable performance. The high-pressure valve port is specially treated with alloy material, the hardness can reach hrc70o, which can effectively avoid the damage of hard particles in the adhesive to the valve port. The seal is made of reinforced polytetrafluoroethylene, resistant to friction and corrosion, suitable for most chemical solvents. More stable performance and longer service life. The control valve adopts static surface grinding to ensure no pressure leakage in the pump.
　　2、电力系统:主泵功率来自液压系统,系统采用进口泵电机、进口齿轮泵和换向阀配件,等等,我的配方生产的油缸,密封使用德国产品,以确保整个液压系统噪音低,性能稳定,寿命长。

　　2. Power system: the power of the main pump comes from the hydraulic system. The system adopts imported pump motor, imported gear pump and reversing valve accessories, etc. the oil cylinder produced by my formula is sealed with German products, so as to ensure the low noise, stable performance and long service life of the whole hydraulic system.
　　双组分胶机
　　Two component glue machine
　　双组分胶机
　　Two component glue machine
　　3.STJ01双组份上胶机系统采用压力板密封全封闭，使胶体与空气完全隔离，无抗胶及氧化作用。有效延长双部件保修。
　　3. Stj01 two-component gluing machine system adopts pressure plate to seal and completely seal, so that the colloid is completely isolated from the air and has no anti glue and oxidation effect. Effectively extend the two part warranty.
　　4. 升降系统由手动旋转阀控制。比例调节可以通过调节摆动杆上滑块的位置来改变。
　　4. The lifting system is controlled by a manual rotary valve. The proportional adjustment can be changed by adjusting the position of the slider on the swing bar.
　　5. 可安装电加热和保温装置。
　　5. Electric heating and insulation device can be installed.
　　6. 主要工作参数/主要工艺参数(介质为重油，20℃。不同的粘度介质在不同的温度下有不同的参数)
　　6. Main working parameters / main process parameters (medium is heavy oil, 20 ℃). Different viscosity media have different parameters at different temperatures)
　　以上就是对双组份打胶机特点的详细介绍，想要了解更多请点击官网http://www.holycitylaw.com
　　The above is a detailed introduction to the features of the two-component dispenser. For more information, please click http://www.holycitylaw.com