双组份打胶机冬季维护保养措施
Maintenance measures of two-component glue beater in winter
1.每天上班后，要把设备上的铝（木）屑清算洁净，特别是设备的传动部位和活动部位（例如：导轨，气缸，任务面板等）;
1. Clean the aluminium (wood) scraps on the equipment after work every day, especially the transmission parts and moving parts of the equipment (e.g. guide rails, cylinders, task panels, etc.).
2.活期反省设备各部位螺丝，避免呈现松动，招致精度误差和平安事故。
2. Introspect the screw of each part of the equipment on demand so as to avoid loosening and lead to accuracy error and safety accident.
3.活期爲设备各传动轴擦抹较爲浓缩的光滑油（例如：直线导轨）;
3. The current period is to wipe concentrated lubricating oil (e.g. linear guideway) on the transmission shafts of the equipment.
4.铝机选择油性的切削液，兑水比例适当增加;
4. Aluminum machine chooses oily cutting fluid, and the proportion of adding water increases appropriately.

5.每天开工前反省设备气路和电磁阀阀体有无结冰景象，确保气路迟滞后运用设备。爲防止呈现气路结冰，一定要做到空气紧缩机每天放水，改换滤芯等。
5. Reflect on whether the air circuit and solenoid valve body of the equipment freeze before start-up every day to ensure that the air circuit lags behind the operation of the equipment. In order to prevent icing of air passage, air compressor must discharge water every day and change filter element.
6.每天反省电源开关能否正常，电线能否老化，如有成绩，立刻改换。
6. Reflect daily on whether the power switch is normal and the wires are aging. If you have any achievements, change it immediately.
7.铝型材.木材等轻拿轻放，避免呈现磕碰，招致设备损坏呈现误差等。
7. Aluminum profiles, wood and other light handling, avoid collision, causing equipment damage presents errors and so on.
8.制止戴手套作业的设备，严禁戴手套作业。不能穿戴围巾等相似衣物，避免呈现平安事故。
8. Stop glove-wearing equipment and strictly prohibit glove-wearing equipment. Do not wear similar clothes such as scarves to avoid safety accidents.
以上内容有济南昌盛机械提供，想了解更多双组份打胶机知识，欢迎关注我们的网站：http://linshi.jncsjx.com谢谢大家！！
The above content is provided by Jinan Changsheng Machinery. To learn more about the two-component glue machine, please pay attention to our website: http://www.holycitylaw.com. Thank you!