1、尽量避免把皮肤暴露在外

1. Try to avoid exposing the skin

热熔胶机通上电后，会形成高压电，触电的危险性大家都知道，所以当热熔胶在工作时，不要用皮肤去触摸热熔胶机的接线处与线路板，防止高压电人事故发生。

After the hot melt adhesive machine is powered on, high voltage electricity will be formed, and the risk of electric shock is well known. Therefore, when the hot melt adhesive is working, do not touch the wiring and circuit board of the hot melt adhesive machine with your skin to prevent high voltage electric accidents.

2、热熔胶机的保护面板不要随意拆卸

2. Do not disassemble the protective panel of the hot melt adhesive machine at will

没有必要，尽量不要拆卸热熔胶机的保护面板。在特殊情况下如果一定要拆，应该把电源断掉，也不要用湿手去触摸带电部位，防止触电。

It is not necessary. Try not to remove the protective panel of the hot melt adhesive machine. Under special circumstances, if it must be removed, the power supply should be cut off first, and do not touch the live part with wet hands to prevent electric shock.

3、接地线不要遗漏

3. Do not omit the grounding wire

热熔胶点胶机在安装的时候一定要选用比较可靠的接地线，好处是可以防止在雷电环境下出现电击危险，这也很好的保障了企业的生产安全。

When installing the hot melt glue dispenser, we must select a more reliable grounding wire. The advantage is that it can prevent the risk of electric shock in the lightning environment, which also well ensures the production safety of the enterprise.

4、三相空气开关一定要选用质量好的

4. The three-phase air switch must be of good quality

电力和温度是热熔胶点胶机的重要参数，为了达到企业生产质量的要求，一定要配备质量好的空气开关，这样才能保障和提高企业的生产效率。

Power and temperature are important parameters of hot melt glue dispenser. In order to meet the requirements of enterprise production quality, we must be equipped with high-quality air switch, so as to ensure and improve the production efficiency of the enterprise.

5、热熔胶点胶机工作环境要远离水源

5. The working environment of hot melt dispensing machine shall be far away from water source

同样，热熔胶点胶机远离水源也是考虑到触电危险，有很多安全事故的发生都是因为接近水源，从而触电伤人的。

Similarly, the hot melt glue dispenser is far away from the water source. Considering the risk of electric shock, many safety accidents occur because it is close to the water source, resulting in electric shock.

以上的精彩内容来自：济南昌盛机械双组份打胶机的介绍及分享，更多内容请继续关注我们：http://linshi.jncsjx.com

The above wonderful content comes from the introduction and sharing of Jinan Changsheng machinery two-component gluing machine. Please continue to pay attention to us for more content: http://linshi.jncsjx.com