将上胶机置于平整、清洁的地方，打开电源和供气，打开电源，开始工作。
　　Place the glue applicator in a flat and clean place, turn on the power supply and air supply, turn on the power supply and start working.
　　1. 打开气泵开关、主电源开关和控制台开关。按下控制台上的手动按钮，在显示屏上找到原点设置，点击辅助原点设置，然后点击头原点设置。
　　1. Turn on the air pump switch, main power switch and console switch. Press the manual button on the console, find the origin setting on the display, click the auxiliary origin setting, and then click the head origin setting.
　　2. 上胶机设置好后，回到玻璃厚度设置。是玻璃厚度，然后是铝垫片，然后是玻璃厚度。注意，只要命令位置与当前位置值匹配，输送机上就不会有玻璃。
　　2. After the gluer is set, return to the glass thickness setting. First, the thickness of the glass, then the aluminum gasket, then the thickness of the glass. Note that there will be no glass on the conveyor as long as the command position matches the current position value.
　　3.混合后，按下一桶胶水上的按钮，按下按钮选择工作，开始按下按钮胶水，按下按钮切割。此时，胶头会自动上胶，如果白胶看不见，按下按钮切断，按下链接线自动运行，但胶头会自动切断。
　　3. After mixing, press the button on the first bucket of glue, press the button to select work, start to press the button glue, and press the button to cut. At this time, the rubber head will be automatically glued. If the white rubber cannot be seen, press the button to cut off, press the link line to automatically run, but the rubber head will automatically cut off.

　　上胶机是现代工业中一种新型的自动喷涂设备。可喷涂各种尺寸、形状的产品。该机主要性能有可调喷胶形状、可调喷胶尺寸、可调反向吸胶量、不同喷胶方式，对喷胶室的清洗有方便的要求。主要用于皮革制品、手袋、箱包、玩具、包装等行业。
　　Sizing machine is a new type of automatic spraying equipment in modern industry. It can spray products of various sizes and shapes. The main features of the machine are adjustable spray shape, adjustable spray size, adjustable reverse suction, different spray methods, which have convenient requirements for cleaning the spray chamber. Mainly used in leather products, handbags, bags, toys, packaging and other industries.
　　以上内容来自胶机小编，本文不代表本站观点。
　　The above content comes from the small edition of glue machine, this paper does not represent the viewpoint of this station.